Replacement Axle Shafts
Alloy USA Chrysler 8.25Inch Rear Axle Shaft – 21118
Availability:
Out of stock
- Replacement Axle Shaft
- 29 Spline
- Driver Or Passenger Side
- Does NOT Include Bearings Seals Or Studs
- For Use In 97-01 Jeep XJ
$354.58
Out of stock
Description
Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA performance shaft. Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 35% stronger.
- Alloy USA | Part Number: ALY21118
- Popular Axle Manufacture:Chrysler
- Axle Shaft Location:Driver Or Passenger
- Axle Location:Rear
- Axle Type:Chrysler 8.25 Inches
- Position:Rear
- Fitment:Universal Fit
- Axle Spline:29 Splines
Specification
| Weight | 20.90 lbs |
|---|---|
| Dimensions | 46.00 × 8.00 × 8.00 in |
| brands |
Fitment
- 2001 Jeep Cherokee (XJ) Classic
- 2001 Jeep Cherokee (XJ) Limited
- 2001 Jeep Cherokee (XJ) SE
- 2001 Jeep Cherokee (XJ) Sport
- 2000 Jeep Cherokee (XJ) Classic
- 2000 Jeep Cherokee (XJ) Limited
- 2000 Jeep Cherokee (XJ) SE
- 2000 Jeep Cherokee (XJ) Sport
- 1999 Jeep Cherokee (XJ) Classic
- 1999 Jeep Cherokee (XJ) Limited
- 1999 Jeep Cherokee (XJ) SE
- 1999 Jeep Cherokee (XJ) Sport
- 1997 Jeep Cherokee (XJ) Country
- 1997 Jeep Cherokee (XJ) SE
- 1997 Jeep Cherokee (XJ) Sport
Related products
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-005
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 18.91″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 68-69 Ford F150, 78-79 Ford Bronco
SKU: G/297-2033-005 -
Replacement Axle Shafts
G2 Dana 60 Chromalloy Outer Axle Shaft – 97-2034-003
- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 60
- Dana 60
- 35 Spline
- 12.00in. Overall Length
- Accepts 5-806X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in GM Dana 60 and Dodge Dana 60 With Loching Hubs
- Required Aftermarket Locking Hubs.
SKU: G/297-2034-003 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-010
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 14.690″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 74-79 Jeep Wagoneer
SKU: G/297-2033-010 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Outer Axle Shaft – 97-2033-001
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 44
- 19 Spline
- 9.72″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in Ford Dana 44
SKU: G/297-2033-001 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2031-001
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2031-001
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 30/44
- 27 Spline
- 6.15″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-001 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2045-001
- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana44
- 30 Spline
- 16.62″ Overall Length
- Accepts D/S 5-760 U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 03-06 Jeep Dana 44 w/Rubicon Option
SKU: G/297-2045-001 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK 07-09 Replacement Axle Shaft – 95-2052-1
- G2 Axle and Gear Jeep JK Dana 44 Replacement Axle
- Forged 1541H Steel
- 31.50in. Overall Length
- 30 Spline
- Brake Pilot Surface 2.828in.
- Bearing 1.565in.
- 5 on 5
- LH/RH
- For use in 07-09 Jeep JK
SKU: G/295-2052-1
