Replacement Axle Shafts
Showing 49–84 of 84 results
-
Replacement Axle Shafts
G2 Dana 30 JK Chromalloy Inner Axle Shaft – 97-2050-003
- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 30
- 27 Spline
- 18.80in.Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 2007-2009 Jeep JK Front Dana 30 Non Rubicon Driver Side
SKU: G/297-2050-003 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2045-001
- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana44
- 30 Spline
- 16.62″ Overall Length
- Accepts D/S 5-760 U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 03-06 Jeep Dana 44 w/Rubicon Option
SKU: G/297-2045-001 -
Replacement Axle Shafts
G2 Dana 35 Replacement Axle Shaft – 95-2049-002
- G2 Axle and Gear Dana 35 Replacement Axle Shaft
- 27 Spline
- 29.04n. Overall Length
- 5 on 4.5in. Bolt Circle
- 1/2in. Press Fit Wheel Studs
- 2.840in. Pilot
- For Use In 1990 Up Cherokee XJ Wrangler YJ/ Wrangler YJ Passenger Side
- Wheel Studs Not Included
SKU: G/295-2049-002 -
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-005
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 30 Spline
- 32.312″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-005 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-006
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 33.91″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 68-69 Ford F150, 78-79 Ford Bronco
SKU: G/297-2033-006 -
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-004
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 30 Spline
- 16.50″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-004 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-005
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 18.91″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 68-69 Ford F150, 78-79 Ford Bronco
SKU: G/297-2033-005 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Chromoly Inner Axle Shaft – 97-2051-002
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44 JK
- 30 Spline
- Stock Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For Use In 2007 Up
SKU: G/297-2051-002 -
Replacement Axle Shafts
G2 Dana 60 Chromalloy Inner Axle Shaft – 97-2034-010
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 60
- Dana 60
- 35 Spline
- 35.07in. Overall Length
- Accepts 5-806X U-Joint
- Machined to Accept Full Circle Clips
- For use in 78-91 GM Dana 60 Driver Side , 79-93 Dodge Dana 60 Driver Side
SKU: G/297-2034-010 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Replacement Axle Shaft – 95-2033-1-302
- G2 Axle and Gear Dana 44 Replacement Axle Shaft
- Dana 44
- 30 Spline
- 29.75in. Overall Length
- 5 on 4.5in. & 5 on 5.5in. Bolt Circle
- Passenger Side
- Tapped for 1/2in,.X 20 UNF Screw in Wheel Studs
- For use in 97-06 Jeep TJ w/Dana 44 Option
- Wheel Studs not included
SKU: G/295-2033-1-302 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
- G2 Axle and Gear Dana 44 JK Rubicon Replacement Axle Shaft
- 32 Spline
- 31.18in. Overall Length
- 5 on 5in. Bolt Circle
- 1/2in. Thread in Wheel Studs Not Included
- 2.828in. Pilot
- For Use On 2007 and up Jeep Wrangler JK Rubicon Only Driver Side
- Wheel Studs Not Included
SKU: G/295-2052-2-321 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-015
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 32.91″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in Scout Dana 44
SKU: G/297-2033-015 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Outer Axle Shaft – 97-2033-002
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 44
- 19 Spline
- 9.92″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in GM Dana 44
SKU: G/297-2033-002 -
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-002
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 27 Spline
- 16.50″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-010
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 14.690″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 74-79 Jeep Wagoneer
SKU: G/297-2033-010 -
Replacement Axle Shafts
G2 Dana 50/60 Chromalloy Outer Axle Shaft – 97-2034-002
- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 50/60
- Dana 50/60
- 35 Spline
- 9.39″” Overall Length
- Accepts 5-806X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in Ford Dana 50/60 Unit Bearing
SKU: G/297-2034-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
- 07-Current Wrangler JK, 2 & 4 Door
- Driver or passenger side
- Dana 44 rear axles
- Non-Rubicon models
- For use with 30 spline aftermarket lockers
- Forged from 4340 Chromoloy steel
- Dual bolt pattern flange 5×5 and 5×5.5
- Made in the USA
SKU: G/2195-2052-1 -
Replacement Axle Shafts
G2 Dana 60 Chromalloy Outer Axle Shaft – 97-2034-003
- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 60
- Dana 60
- 35 Spline
- 12.00in. Overall Length
- Accepts 5-806X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in GM Dana 60 and Dodge Dana 60 With Loching Hubs
- Required Aftermarket Locking Hubs.
SKU: G/297-2034-003 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2032-001
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2032-001
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 30/44
- 27 Spline
- 8.72″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in 72-86 Jeep CJ, Scout Dana 44
SKU: G/297-2032-001 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Replacement Axle Shaft – 95-2033-1-301
- G2 Axle and Gear Dana 44 Replacement Axle Shaft
- Dana 44
- 30 Spline
- 29.25in. Overall Length
- 5 on 4.5in. & 5 on 5.5in. Bolt Circle
- Driver Side
- 1/2in. X 20 UNF Wheel Studs needed
- For use in 97-06 Jeep TJ w/Dana 44 Option
SKU: G/295-2033-1-301 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2031-001
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 30/44 Chromalloy Outer Axle Shaft – 97-2031-001
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 30/44
- 27 Spline
- 6.15″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-001 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2045-002
- G2 Axle and Gear Chromoly Inner Axle Shaft
- Dana 44
- 30 Spline
- 31.88″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 03-06 Jeep Dana 44 w/Rubicon Option
SKU: G/297-2045-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK 07-09 Replacement Axle Shaft – 95-2052-1
- G2 Axle and Gear Jeep JK Dana 44 Replacement Axle
- Forged 1541H Steel
- 31.50in. Overall Length
- 30 Spline
- Brake Pilot Surface 2.828in.
- Bearing 1.565in.
- 5 on 5
- LH/RH
- For use in 07-09 Jeep JK
SKU: G/295-2052-1 -
-
-
-
-
-
