G2 Axle and Gear
Showing 337–384 of 421 results
-
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-005
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 30 Spline
- 32.312″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-005 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-006
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 33.91″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 68-69 Ford F150, 78-79 Ford Bronco
SKU: G/297-2033-006 -
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-004
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 30 Spline
- 16.50″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-004 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-005
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 18.91″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 68-69 Ford F150, 78-79 Ford Bronco
SKU: G/297-2033-005 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Chromoly Inner Axle Shaft – 97-2051-002
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44 JK
- 30 Spline
- Stock Overall Length
- Accepts 5-7166X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For Use In 2007 Up
SKU: G/297-2051-002 -
Dana 44 Bearings and Install Kits, Wheel Bearings
G2 Dana 44/GM 10 Bolt Front Wheel Bearing Kit – 30-8006
Dana 44 Bearings and Install Kits, Wheel BearingsG2 Dana 44/GM 10 Bolt Front Wheel Bearing Kit – 30-8006
- G2 Axle and Gear Front Wheel Bearing Kit
- For use in Dana 44/GM 10 Bolt
- All Parts For One Side
- Timken Inner Wheel Bearing And Race
- Timken Outer Wheel Bearing And Race
- Wheel Bearing Seal
SKU: G/230-8006 -
-
-
Replacement Axle Shafts
G2 Dana 60 Chromalloy Inner Axle Shaft – 97-2034-010
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 60
- Dana 60
- 35 Spline
- 35.07in. Overall Length
- Accepts 5-806X U-Joint
- Machined to Accept Full Circle Clips
- For use in 78-91 GM Dana 60 Driver Side , 79-93 Dodge Dana 60 Driver Side
SKU: G/297-2034-010 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Replacement Axle Shaft – 95-2033-1-302
- G2 Axle and Gear Dana 44 Replacement Axle Shaft
- Dana 44
- 30 Spline
- 29.75in. Overall Length
- 5 on 4.5in. & 5 on 5.5in. Bolt Circle
- Passenger Side
- Tapped for 1/2in,.X 20 UNF Screw in Wheel Studs
- For use in 97-06 Jeep TJ w/Dana 44 Option
- Wheel Studs not included
SKU: G/295-2033-1-302 -
-
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
- G2 Axle and Gear Dana 44 JK Rubicon Replacement Axle Shaft
- 32 Spline
- 31.18in. Overall Length
- 5 on 5in. Bolt Circle
- 1/2in. Thread in Wheel Studs Not Included
- 2.828in. Pilot
- For Use On 2007 and up Jeep Wrangler JK Rubicon Only Driver Side
- Wheel Studs Not Included
SKU: G/295-2052-2-321 -
Uncategorized
G2 Chrysler 8.25 Inch Aluminum Cover Black – 40-2029ALB
- For Use On Chrysler 8.25in. Rear Axles
- Cast From Lightweight Aluminum To Dissipate Heat
- Black Powder Coat Finish
- ReinForcing Ribs For Added Rigidity And Strength
- Heat Treated And Shot Peened To Help Handle A Direct Impact
- Fully Machined Seal Surface For A Leak Free Installation
SKU: G/240-2029ALB -
Uncategorized
G2 G2 Dana 35 G-2 Aluminum Differential Cover Black – 40-2049ALB
- Dana 35
- Cast From Lighweight Aluminum to Disipate Heat
- Reinforcing Ribs for Added Rigidity and Strength
- Heat Treated and Shot Peened to Handle Direct Impact
- Fully Machined Seal Surface for a Leak Free Installation
- Black powder coated
SKU: G/240-2049ALB -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-015
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 32.91″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in Scout Dana 44
SKU: G/297-2033-015 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Outer Axle Shaft – 97-2033-002
- G2 Axle and Gear Chromoly Outer Axle Shaft
- Dana 44
- 19 Spline
- 9.92″” Overall Length
- Accepts 5-760X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in GM Dana 44
SKU: G/297-2033-002 -
Replacement Axle Shafts
G2 Dana 30 Chromalloy Inner Axle Shaft – 97-2031-002
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 30
- Dana 30
- 27 Spline
- 16.50″” Overall Length
- Accepts 5-760X U-Joint
- Driver Side
- Machined to Accept Full Circle Clips
- For use in 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint
SKU: G/297-2031-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 Chromalloy Inner Axle Shaft – 97-2033-010
- G2 Axle and Gear Chromoly Inner Axle Shaft Dana 44
- Dana 44
- 30 Spline
- 14.690″” Overall Length
- Accepts 5-760X U-Joint
- Passenger Side
- Machined to Accept Full Circle Clips
- For use in 74-79 Jeep Wagoneer
SKU: G/297-2033-010 -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
- 07-Current Wrangler JK, 2 & 4 door
- Rubicon models
- Dana 44 front and Dana 44 rear
- 4.56 G2 ring and pinion sets
- Includes front and rear matched minor installation kits
- Limited lifetime warranty
- Computer heat treated 8620 steel
- Manufactured to O.E. specs
- Double shot peened
- Double lapped
SKU: G/24-JKRUB-456M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
- 07-Current Wrangler JK, 2 & 4 door
- Rubicon models
- Dana 44 front and Dana 44 rear
- 4.88 G2 ring and pinion sets
- Includes front and rear matched minor installation kits
- Limited lifetime warranty
- Computer heat treated 8620 steel
- Manufactured to O.E. specs
- Double shot peened
- Double lapped
SKU: G/24-JKRUB-488M -
-
Replacement Axle Shafts
G2 Dana 50/60 Chromalloy Outer Axle Shaft – 97-2034-002
- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 50/60
- Dana 50/60
- 35 Spline
- 9.39″” Overall Length
- Accepts 5-806X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in Ford Dana 50/60 Unit Bearing
SKU: G/297-2034-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
- 07-Current Wrangler JK, 2 & 4 Door
- Driver or passenger side
- Dana 44 rear axles
- Non-Rubicon models
- For use with 30 spline aftermarket lockers
- Forged from 4340 Chromoloy steel
- Dual bolt pattern flange 5×5 and 5×5.5
- Made in the USA
SKU: G/2195-2052-1 -
-
-
Uncategorized
G2 GM 8.5 Inch/8.6 Inch 10 Bolt Aluminum Cover Black – 40-2021ALB
- For Use On GM 8.5in. And 8.6in. Rear Axles Only
- Cast From Lightweight Aluminum To Dissipate Heat
- Black Powder Coat Finish
- ReinForcing Ribs For Added Rigidity And Strength
- Heat Treated And Shot Peened To Help Handle A Direct Impact
- Fully Machined Seal Surface For A Leak Free Installation
SKU: G/240-2021ALB -
Replacement Axle Shafts
G2 Dana 60 Chromalloy Outer Axle Shaft – 97-2034-003
- G2 Axle and Gear Chromoly Outer Axle Shaft Dana 60
- Dana 60
- 35 Spline
- 12.00in. Overall Length
- Accepts 5-806X U-Joint
- Driver and Passenger Side
- Machined to Accept Full Circle Clips
- For use in GM Dana 60 and Dodge Dana 60 With Loching Hubs
- Required Aftermarket Locking Hubs.
SKU: G/297-2034-003 -
Uncategorized
G2 Ford 9.75 Inch Aluminum Cover Black – 40-2012ALB
- For Use On Ford 9.75in. Rear Axles
- Cast From Lightweight Aluminum To Dissipate Heat
- Black Powder Coat Finish
- ReinForcing Ribs For Added Rigidity And Strength
- Heat Treated And Shot Peened To Help Handle A Direct Impact
- Fully Machined Seal Surface For A Leak Free Installation
SKU: G/240-2012ALB -
Uncategorized
Chrysler 9.25 Front Aluminum Differential Cover
- Chrysler 9.25 front axle
- Cast from lightweight aluminum
- Black powder coat finish
- Ball milled reinforcing ribs
- Heat treated and shot peened helps handle direct impact
- Fully machined seal surface for a leak free installation
- Convenient filler plug for easy service
- Fill level plug for accurate fill level for both high and low pinion axles
SKU: G/240-2026MBF -
-
Uncategorized
G2 GM 10.5 Inch 14 Bolt Aluminum Cover – 40-2023AL
- For Use On GM 10.5in. 14 Bolt Rear Axles
- Cast From Lightweight Aluminum To Dissipate Heat
- Raw Aluminum Finish
- ReinForcing Ribs For Added Rigidity And Strength
- Heat Treated And Shot Peened To Help Handle A Direct Impact
- Fully Machined Seal Surface For A Leak Free Installation
SKU: G/240-2023AL -
Uncategorized
G2 Dana 50/60/70 Aluminum Cover – 40-2034AL
- For Use On Most Dana 60/70 Front Or Rear Axles
- Cast From Lightweight Aluminum To Dissipate Heat
- Raw Aluminum Finish
- Reinforcing Ribs For Added Rigidity And Strength
- Heat Treated And Shot Peened To Help Handle A Direct Impact
- Fully Machined Seal Surface For A Leak Free Installation
- Will Not Fit Leaf Spring Front Axles With Out High Steer
SKU: G/240-2034AL -
Dana 44 Hubs and Spindles, Locking Hubs
G2 G2 Dana 44 GM 10 Bolt Extreme Hubs (Polished Aluminum) – 89-2033-1
Dana 44 Hubs and Spindles, Locking HubsG2 G2 Dana 44 GM 10 Bolt Extreme Hubs (Polished Aluminum) – 89-2033-1
- For Use With 19 Spline Axle Shafts
- Nodular Hub Body Not Pot Metal Like Other Brands
- Heat Treated Steel Locking Ring
- Aluminum Cap For Corrosion Resistance
- Alloy Dial
- Lifetime Warranty
- Fits most 1/2 and 3/4 ton Dana 44 and GM 10 bolt axles
- Vehicles With 3 bolt automatic hub covers require spindle nut kit part number D/S28068X
SKU: G/289-2033-1
